363 CUBIC INCH 507 HP BOSS CRATE ENGINE-Z2 HEADS-FRONT SUMP PAN
SKU: M6007Z2363FT
About This Item
Product Details
- 507 HP on Pump Gas - in a 302 Sized package
- Built with the Best All New Parts
- Uses standard SBF Headers and accessory mounts
- From the guys that know Ford Performance Best – Ford Performance Engineers
507 horsepower @ 6500 rpm
450 lb. -ft. torque @ 5100 rpm
Click below to read the Mustang360 story on this engine:
Crate Expectations: Ford Performance Parts delivers the goods with its new Z2363 crate engines
- Engine type: 302 based small block Ford
- Displacement (cu in): 363
- Bore x stroke (in): 4.125" bore x 3.400" stroke
- Block: Boss 302 8.2 deck M-6010-BOSS302
- Crankshaft: SCAT® Forged Steel
- Connecting rods: SCAT forged steel I-beam connecting rods and ARP® bolts
- Pistons: Forged Mahle® w/ floating wrist pins
- Camshaft type: Hydraulic Roller
- Camshaft lift (in): .580"/.602"
- Camshaft duration (@.050 in): 232°/240°
- Cylinder Heads Ford Performance Aluminum "Z2" Cylinder Heads M-6049-Z2
- Valve size (in): 2.05" intake 1.60" exhaust
- Valve Springs: PAC® 1219X Ovate Beehive
- Compression ratio: 10.2:1 (nominal)
- Rocker arms: Roller Rockers – 1.65:1 Ratio
- Vibration Damper: Ford Performance SFI Approved
- Valve covers: "Ford Racing" cast aluminum-black 302-135
- Oil pan: high performance 7 quart capacity and windage tray / scraper
- Water pump: Edelbrock® hi-performance
- Includes Ford Performance M-9439-A50 intake manifold gaskets
- Does not include distributor, intake and flywheel
- Required fuel: Premium unleaded
- Built with current available parts. Photo and specs may vary.
- Engine installation tuning tips can be found HERE
- Note: Results obtained using Edelbrock® Super Victor Intake Manifold and 750 cfm carburetor. This combination does not fit all applications
Technical Specifications
Details:
Country of Origin: United States
Emission Type: Competition Only
Warranty: Available
UPC: 756122006092
Catalog: FPP
Instructions:
363 CUBIC INCH 507 HP BOSS CRATE ENGINE-Z2 HEADS-FRONT SUMP PAN: Instruction Guide
Return Policy
Ford or the dealer (where applicable) will accept returns or exchanges of applicable Ford Parts, Ford Accessories, Lincoln Accessories and Ford Performance Parts within 30 days of your receipt. Once you have initiated a return, you must return the part(s) within 14 calendar days. Electronics, wheels, bedcaps, Bronco hardtop (M10500HT), chemicals, lubricants and custom-painted parts cannot be returned at any time for any reason. All returns and exchanges must be returned to Ford (for orders shipped directly to you) or the dealer (for orders picked up from the dealer) solely at your expense, except in the case of Ford or dealer error. Returned items must be in the original box, in new, non-installed, resalable condition, with all instructions and hardware, and in the condition it was received. If all of these conditions are not met, it is at discretion of Ford or the dealer (where applicable) to accept the return. Shipping charges are non-refundable.Refunds will be credited to the same card or, in our discretion, other payment method. If you opt not to provide a VIN(s), you are solely responsible for making sure the accessories you have ordered are compatible with your vehicle. Attempting to return any parts or assemblies that have been tampered with in a manner that affects the re-salability and/or safety of the part(s) is prosecutable under the law, and these parts and assemblies are not eligible for return credit, refund and/or exchange. If you believe a product sold by Ford has a condition or defect that might make it unsafe, please report this safety concern immediately by using the chat feature on the Site or by calling 844-589-0060.