SMALL BLOCK V-8 HYDRAULIC ROLLER TAPPET CAMSHAFTS

SKU: M6250B303

$410.00

 to redeem up to
Shipping: Ships by Nov. 24
Pickup: Free at Dealer by Nov. 26

About This Item

Product Details

The legendary B303 cam developed by Ford Performance for the 5.0L Fox-body Mustang. This cam provides a noticeable power improvement and lumpy idle while maintaining good driveability with a manual transmission. Works well with carburetors or mass air fuel injection.

  • Fits 1985 and later 302 roller cam blocks
  • Will also fit 1963-1984 non-roller cam 289-302 blocks when used with aftermarket tie-bar hydraulic roller lifters
  • Will also fit 1994-1997 351W blocks with factory roller cam
  • Will also fit 1969-1993 non-roller cam 351W blocks when used with aftermarket tie-bar hydraulic roller lifters
  • Requires upgraded valve springs
  • Valve spring requirements: 120 lbs valve seat pressure minimum 295 lbs open.
  • On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI or speed density EFI systems.
  • Also fits 1994-97 351W with factory roller cam when used with mass air EFI.
  • Stock 5.0L HO cam advertised specs are 266°/266° duration, 0.444"/0.444" lift.
  • Higher stall torque converter recommended for automatic transmission
PART NUMBER ENGINE ROCKER
RATIO 		INTAKE EVENTS
(0.050") 		EXHAUST EVENTS
(0.050") 		DURATION
(SAE) 		LIFT
(INCHES) 		LOBE
CENTER
OPEN CLOSE OPEN CLOSE INT. EXH. LOBE VALVE INT. EXH.
M-6250-B303*
(1)(2)(3)(6) 		1985 and Later 302 Roller Cam 1.60 5° BTC 39° ABC 49° BBC 5° BTC 284° 284° .300 I .480 I 107° 117°
224° 224 .300E .480 E
M-6250-E303
(1)(2)(3)(6) 		1985 and Later 302 Roller Cam 1.60 0° BTC 40° ABC 40° BBC 0° BTC 282° 282° .311 I .498 I 110° 110°
220° 220° .311E .498 E
M-6250-F303*
(1)(2)(3)(4)
(6)(7) 		1985 and Later 302 Roller Cam 1.60 4° BTC 42° ABC 52° BBC 6° BTC 288° 288° .320 I .512 I 109° 119°
226° 226° .320E .512 E
M-6250-X303*
(1)(2)(3)(4)
(6)(8) 		1985 and Later 302 Roller Cam 1.60 5° BTC 39° ABC 49° BBC 5° BTC 286° 286° .339 I .542 I 107° 117°
224° 224° .339E .542 E

 

NOTE: Camshaft intake and exhaust valve events are measured at 0.050" tappet lift. The duration figures in the shaded area are taken at 0.050" tappet lift. This is useful to check the cam with a degree wheel during installation. The solid color is advertised duration. For comparison purposes, add intake and exhaust lobe centers and divide by 2 to calculate "camshaft centerline" specification for Ford Performance camshafts.

NOTES: (1) On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI. (2) Also fits 1994-97 351W with factory roller cam when used with mass air EFI. (3) Stock 5.0L HO cam advertised specs are 266°/266° duration, 0.444"/0.444" lift. (4) May require piston modification for piston-to-valve clearance. Valve clearance should be checked. (5) May require longer pushrods. (6) Hi-Stall torque converter recommended for automatic trans. (7) Great for superchargers. Manual transmission recommended. (8) Good torque and power up to 6200 RPM. Manual transmission recommended. 

Technical Specifications

Details:

  • Country of Origin: United States

  • Emission Type: Competition Only

  • Warranty: Available

  • UPC: 756122625026

  • Catalog: FPP

Fits These Vehicles

  • Ford Mustang 1985-1995
    • GT

Return Policy

Ford or the dealer (where applicable) will accept returns or exchanges of applicable Ford Parts, Ford Accessories, Lincoln Accessories and Ford Performance Parts within 30 days of your receipt. Once you have initiated a return, you must return the part(s) within 14 calendar days. Electronics, wheels, bedcaps, Bronco hardtop (M10500HT), chemicals, lubricants and custom-painted parts cannot be returned at any time for any reason. All returns and exchanges must be returned to Ford (for orders shipped directly to you) or the dealer (for orders picked up from the dealer) solely at your expense, except in the case of Ford or dealer error. Returned items must be in the original box, in new, non-installed, resalable condition, with all instructions and hardware, and in the condition it was received. If all of these conditions are not met, it is at discretion of Ford or the dealer (where applicable) to accept the return. Shipping charges are non-refundable.Refunds will be credited to the same card or, in our discretion, other payment method. If you opt not to provide a VIN(s), you are solely responsible for making sure the accessories you have ordered are compatible with your vehicle. Attempting to return any parts or assemblies that have been tampered with in a manner that affects the re-salability and/or safety of the part(s) is prosecutable under the law, and these parts and assemblies are not eligible for return credit, refund and/or exchange. If you believe a product sold by Ford has a condition or defect that might make it unsafe, please report this safety concern immediately by using the chat feature on the Site or by calling 844-589-0060.