Pre-Collision Assist With Automatic Emergency Braking
This system scans the road ahead, alerting you to potential collisions with vehicles or pedestrians. * If an impact becomes imminent and you don’t take corrective action, the brakes can apply automatically if needed.10
Dramatization.
*Driver-assist features are supplemental and do not replace the driver’s attention, judgment and the need to control the vehicle. Pre-collision Assist with Automatic Emergency Braking detects pedestrians, but not in all conditions, and can help avoid or reduce a collision. It does not replace safe driving. See Owner’s Manual for details and limitations.
Lane-Keeping System
Veer out of your lane and you are alerted through steering wheel vibrations. Lane-Keeping Aid mode applies steering torque to help you back to the center. * Driver Alert sends out warnings when it detects repeated lane drifts — a reminder to pull over and take a break.10
Dramatization.
*Lane-Keeping System does not control steering.
Auto High-Beam Headlamps
A windshield-mounted camera scans the road, automatically switching on headlamps in poor lighting conditions. Sensing oncoming headlamps or taillamps, the headlamps automatically dim, returning to high beam when clear.
Dramatization.
BLIS® (Blind Spot Information System) With Cross-Traffic Alert
Helps detect and alert you to vehicles in your blind spots. Cross-Traffic Alert detects traffic behind you when you’re backing out of a parking spot or driveway.10
Dramatization.
Rear View Camera
See what’s behind you before backing up. Active side and center guidelines appear on-screen to assist backing into a parking space or lining up a trailer.10
Dramatization.
Adaptive Cruise Control With Stop-and-Go and Lane Centering Assist
The available system automatically slows your vehicle if traffic ahead has slowed or stopped. When traffic picks up your vehicle resumes to the set speed. * Lane Centering Assist scans lane markings to help keep your vehicle between the lines.10
Dramatization.
*If the vehicle is stopped for more than three seconds, the driver must intervene and press the “RES” button or accelerator pedal to resume system operation.
